Connecting The Positioner To The 19" Slide-In Module - Siemens SIPART PS2 Operating Instructions Manual

Positioner with remote control electronics
F.2 19" slide-in module
F.2.2

Connecting the positioner to the 19" slide-in module

Requirement
You are familiar with:
● Safety instructions in section Connect (Page 77)
● Commissioning positioner 6DR5910-... and 19" slide-in module (Page 352)
● Grounding concept 19" slide-in module (Page 361)
Procedure
①
②
③
④
⑤
Figure F-2
354
Connection point field distributor to control
room
Cable
Cable gland
Connecting terminals, positioner
Wiring diagram on module cover of the basic
electronics
Connecting positioner to 19" slide-in module
⑥
Male connector Burndy B50
⑦
QRL module
⑧
Socket Burndy B50, connector on the QRL
module
⑨
19" slide-in module
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC