Spare Parts - Siemens SIPART PS2 Operating Instructions Manual

Spare parts/accessories/scope of delivery

15.2 Spare parts

● SIA module: one binary output for fault messages, two binary outputs for limit monitors
● Mechanical limit switch module with two switches and one alarm output
● Internal NCS module 6DR4004-5L/-5LE
The SIA module and the mechanical limit switch module cannot be used in device versions with
flameproof enclosure. For more limitations, please refer to section "Technical data (Page 281)".
Accessories
● Pressure gauge block: 2 or 3 pressure gauges for single and double-acting positioners
● Mounting flange (NAMUR) for safety pneumatic block
● Mounting kits for linear and part-turn actuators
For separate mounting of positioner and position sensor
● External position detection system
● NCS sensor for contactless position detection
Note
The version is identified using a special nameplate.
15.2 Spare parts
Description
PROFIBUS PA, not Ex
PROFIBUS PA, Ex
Interface module for positioner without basic electronics A5E00151572
Interface module for 19-inch slide-in module 4 ... 20 mA A5E00151571
Description
Single-acting, with seal and screws
300
Article number
Basic electronics
A5E00141523
A5E00141550
Article number
Pneumatic block
C73451-A430-D80
Operating Instructions, 05/2019, A5E00127926-AC
For version
6DR55..-.N
6DR55..-.D/E/F/G/K
6DR5910-*
A5E00151560
For version
6DR5.1.*
SIPART PS2 with PROFIBUS PA