Emc Filter Module; Internal Ncs Modules 6Dr4004-5L And 6Dr4004-5Le; Other Technical Specifications - Siemens SIPART PS2 Operating Instructions Manual

Technical data
13.10 Option modules
13.10.5

EMC filter module

The EMC filter module type 6DR4004-6F is required to connect electro-sensitive, external
position detection, e.g. NCS module type 6DR4004-6N*/-8N* or an external position detection system with
For devices without explosion protection, other types of potentiometers with a resistance of 10 kilohms
Maximum values when powered by the
base unit with PA (6DR55) or FF commu‐
nication (6DR56)
Peak values when supplied by other basic
devices (6DR50/1/2/3/9)
Supply and signal power circuits
13.10.6

Internal NCS modules 6DR4004-5L and 6DR4004-5LE

Additional modules
Internal NCS module
Linearity (after corrections made by
positioner)
Hysteresis
13.10.7

Other technical specifications

Technical specifications for additional option modules and accessories is available at:
● Technical specifications NCS (Page 321)
● Technical specifications of the external position detection system (Page 326)
● Sealing plug / thread adapter (Page 331)
● Positioner with remote control electronics (Page 351)
294
Without Ex protection With Ex protection
potentiometer type C73451-A430-D78 or 6DR4004-1ES.
can be connected.
U = 5 V
max
U = 5 V
max
Without Ex protection
6DR4004-5L
± 1 %
± 0.2 %
Ex "ia", "ic"
U = 5 V
o
I = 75 mA static
o
I = 160 mA transient
o
P = 120 mW
o
C = 1 μF
o
L = 1 mH
o
U = 5 V
o
I = 100 mA
o
P = 33 mW
o
C = 1 μF
o
L = 1 mH
o
Galvanically connected with the basic device
With Ex protection
Ex "ia"
6DR4004-5LE
± 1 %
± 0.2 %
Operating Instructions, 05/2019, A5E00127926-AC
With explosion protection
Ex "ec", "t"
U = 5 V
max
U = 5 V
max
With explosion protection
Ex "ic", "ec", "t"
6DR4004-5LE
± 1 %
± 0.2 %
SIPART PS2 with PROFIBUS PA