Certificates, Approvals, Explosion Protection; Electrical Specifications - Siemens SIPART PS2 Operating Instructions Manual

Technical data

13.7 Electrical specifications

Positioner, modules and position detection sys‐
tems
● Already fitted:
6DR5ayb-0cdef-g.Ah-Z ...
for f = 1, 3
● Can be retrofitted 6DR4004-6J
● Already fitted and can be retrofitted:
6DR5ayb-0cdef-g*Ah-Z M40
for f = 1, 3
Position detection systems
● Non-Contacting Sensor (NCS)
6DR4004-6N**-0-***
● External position detection system in the
polycarbonate enclosure with potentiometer
C73451-A430-D78
● External Position Transmitter (Potentiometer)
6DR4004-1ES
● External Position Transmitter (NCS)
6DR4004-2ES
13.6

Certificates, approvals, explosion protection

Certificates and approvals
Classification according to pressure equip‐
ment directive (PED 2014/68/EU)
CE conformity
UL conformity
13.7 Electrical specifications
Auxiliary power supply bus cir‐
cuit
Bus voltage
For connecting to circuits with
the following peak values
286
Temperature class T4
-30 °C ≤Ta ≤ +80 °C
-40 °C ≤Ta ≤ +80 °C
-40 °C ≤Ta ≤ +90 °C
-40 °C ≤Ta ≤ +90 °C
-40 °C ≤Ta ≤ +90 °C
-40 °C ≤Ta ≤ +90 °C
For fluid group 1 gases; fulfills requirements according to article 4, paragraph 3
(good engineering practice SEP)
The applicable directives and applied standards with their revision levels can be
found in the EU declaration of conformity on the Internet.
You can find the appropriate "Standard(s) for Safety", including the relevant
versions, in the UL-CERTIFICATE OF COMPLIANCE on the Internet.
Basic device without Basic device with ex‐
explosion protection plosion protection
Ex d
9 ... 32 V 9 ... 32 V
Temperature class T6
-40 °C ≤Ta ≤ +70 °C
-40 °C ≤Ta ≤ +60 °C
-40 °C ≤Ta ≤ +60 °C
-40 °C ≤Ta ≤ +50 °C
Basic device with ex‐
plosion protection
Ex "ia"
Bus-powered
9 ... 24 V
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC
-
-
Basic device with ex‐
plosion protection Ex
"ic", "ec", "t"
9 ... 32 V