Calibration Report - Siemens SIPART PS2 Operating Instructions Manual

Functions/operations using PROFIBUS PA
9.2 Acyclic data transfer
In the "Diagnostics" tab you can find:
● Communication
● Last test
● Message text
"Communication" tab
In this "Communication" tab you can display the address of a device. If the device has been
configured in the process device network view, you can change the address.
In the "Communication" tab you can find:
● Redundancy
"Document manager" tab
In this "Document manager" tab, you can assign documents to a PDM object.
9.2.2.6

Calibration report

The "Calibration report" section contains information on the following topics:
"Test environment" tab
In this "Test environment" tab you can find:
● Data on the field device
● Data on the operator and test date of the calibration report
● Operator remarks concerning the test
● Comment field
● Settings for scheduling
"Diagnostics" tab
In this "Diagnostics" tab you can find:
● Information on display of the communication connection status
● Information on display of the device status
● Date of the last change
● Messages of the last test
192
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC