Table of Contents
Advertisement
Quick Links
Garden Tool Power Head
91653
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
©
®
Copyright
2004 by Harbor Freight Tools
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form with-
out the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Advertisement
Table of Contents
Summary of Contents for Chicago Electric 91653
- Page 1 Garden Tool Power Head 91653 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com © ® Copyright 2004 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form with- out the express written consent of Harbor Freight Tools.
-
Page 2: Product Specifications
Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. SKU 91653 PAGE 2 For technical questions, please call 1-800-444-3353. -
Page 3: Electrical Safety
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. SKU 91653 PAGE 3 For technical questions, please call 1-800-444-3353. - Page 4 Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. SKU 91653 PAGE 4 For technical questions, please call 1-800-444-3353.
-
Page 5: Specific Safety Rules
Do not force this tool. This tool will do the work better and safer at the speed and capacity for which it was designed. Do not force the tool beyond its stated capacity. SKU 91653 PAGE 5 For technical questions, please call 1-800-444-3353. - Page 6 WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. SKU 91653 PAGE 6 For technical questions, please call 1-800-444-3353.
-
Page 7: Grounded Tools: Tools With Three Prong Plugs
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.) FIGURE A SKU 91653 PAGE 7 For technical questions, please call 1-800-444-3353. -
Page 8: Double Insulated Tools: Tools With Two Prong Plugs
If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) SKU 91653 PAGE 8 For technical questions, please call 1-800-444-3353. - Page 9 FIGURE C to five volts at 150% of the rated amperes. SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions xxxx/min. per Minute (RPM) SKU 91653 PAGE 9 For technical questions, please call 1-800-444-3353.
- Page 10 Remove the protective plastic End (Power Head) Attachment Shaft Cap from the Attachment Shaft of the Accessory. Save the cap for later Locking Knob (opposite Guide Recess use. side, partially hidden) SKU 91653 PAGE 10 For technical questions, please call 1-800-444-3353.
- Page 11 Place the Washer and Nut onto the Bolt, and tighten enough to secure the Upper Handle. Front Handle NOTE: Do not overtighten the Bolt and Nut, as you may break the plastic handle. SKU 91653 PAGE 11 For technical questions, please call 1-800-444-3353.
- Page 12 Be conscious of the safety issues raised by each different attachment you may use with this tool. Some attachments create a hazard of thrown debris. Others create hazards of blown dust or danger of being injured by a moving blade. SKU 91653 PAGE 12 For technical questions, please call 1-800-444-3353.
-
Page 13: Inspection, Maintenance, And Cleaning
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 91653 PAGE 13 For technical questions, please call 1-800-444-3353. -
Page 14: Parts List
" " t a l t l o t a l t l o SKU 91653 PAGE 14 For technical questions, please call 1-800-444-3353. - Page 15 SKU 91653 PAGE 15 For technical questions, please call 1-800-444-3353.