Table of Contents
Advertisement
Left side
Component
(1)
(2)
(3)
(4)
(5)
4
Chapter 2 Getting to know your computer
USB Type-C power connector and
port
AC adapter and battery light
Audio-out (headphone)/Audio-in
(microphone) combo jack
MicroSD memory card reader
Power button
Description
Connects an AC adapter that has a USB Type-C connector, supplying power to
the computer and, if needed, charging the computer battery.
– and –
Connects a USB device that has a Type-C connector, such as a cell phone,
camera, activity tracker, or smartwatch, and provides data transfer.
– and –
Connects a display device that has a USB Type-C connector, providing
DisplayPort output.
NOTE:
Cables and/or adapters (purchased separately) may be required.
●
White: The AC adapter is connected and the battery is fully charged.
●
Amber: The AC adapter is connected and the battery is charging.
Blinking amber: The battery has an error.
●
●
Off: The battery is not charging.
Connects optional powered stereo speakers, headphones, earbuds, a headset,
or a television audio cable. Also connects an optional headset microphone.
This jack does not support optional standalone microphones.
WARNING!
To reduce the risk of personal injury, adjust the volume before
putting on headphones, earbuds, or a headset. For additional safety
information, refer to the Regulatory, Safety, and Environmental Notices.
NOTE:
When a device is connected to the jack, the computer speakers are
disabled.
Reads optional memory cards that enable you to store, manage, share, or
access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing the computer.
2.
Insert the card into the memory card reader, and then press in on the
card until it is firmly seated.
To remove a card:
Press in on the card, and then remove it from the memory card reader.
▲
●
When the computer is off, press the button to turn on the computer.
●
When the computer is in the Sleep state, press the button briefly to exit
Sleep.
Hide quick links:
Advertisement
Table of Contents
