Bottom Cover - HP Chromebook 15 Series Maintenance And Service Manual

Bottom cover

Table 5-1 Bottom cover, Rubber Foot Kit, and Miscellaneous Kit descriptions and part numbers
Description
Bottom cover for use in cloud blue models
Bottom cover for use in mineral silver models
Rubber Foot Kit for use on cloud blue models
Rubber Foot Kit for use on mineral silver models
Miscellaneous Kit (includes screw covers)
Before disassembling the computer, follow these steps:
Prepare the computer for disassembly
▲
Remove the rubber feet and bottom cover:
1. Position the computer upside down.
2. Remove the two front rubber feet (1).
3. Remove the two rear rubber feet (2).
4. Remove the Phillips M2.5 × 6.0 screw (3) from under each foot.
5. Remove the three screw covers (4) and three Phillips M2.0 × 3.0 screws (5) from the bottom edge.
6. Place a suction cup on the bottom cover (1), and then rotate the handle (2) to lock the suction cup in
place.
7. Using the suction cup handle (3), pull the bottom cover free from the computer (4).
(Preparation for disassembly on page
Spare part number
L54802-001
L54803-001
L54801-001
L54833-001
L54819-001
22).
Component replacement procedures 23