Health O Meter 1100KL User Instructions page 16

OPERATING INSTRUCTIONS
Weighing a Patient
1. Make sure there is nothing on the weighing platform and the
display shows "0.0".
2. Ask the patient to step on the scale. The scale will begin to
display the patient's weight and the word "PROCESSING".
Depending on the movement of the patient on the scale, it
may take several seconds for the scale to lock onto the
weight. The display will show the patient's weight and the
word "LOCKED" when measuring is completed. Note: The
scale will not lock on a weight less than 5 lb / 2.27 kg.
3. The weight may be held on the display by pressing
The scale will continue to display the patient's weight after
they step off the scale and will remain on the display until
released or the scale is powered off. To release, press
4. To reweigh the patient without having them step off of the
scale, press
Reweigh
5. To see the patient's weight in another unit of measurement,
press and hold down
convert the weight to KG. If the scale is in KG mode, it will
convert the weight to LB. Note: This function is not available
on KG models or on KL models with Everlock
with the "Unit View" setting disabled.
Weight Recall
1. To recall the last weight measured, press
2. To clear the display of the recalled weight, press
P/N UM1100KL_1100KG_REV20181128
.
. If the scale is in LB mode, it will
Unit
Hold/
.
Release
Hold/
.
Release
®
engaged or
Recall
.
Zero
.
(Clear)
16