DIP Switches
Set the circuit breaker rating DIP switches (see Figure 12 ).
Figure 12: Safety Switch with EV Charger internal interfaces
To set the circuit breaker ratings:
Use the circuit breaker rating DIP switches to set circuit breaker ratings.
Circuit Breaker Rating
20 A
30 A
40 A
50 A
Buzzer
The EV charger includes a buzzer with the following indications:
Event
Connected to EV
Charging starts
Error
Opening Conduit Drill Guides
This step may be performed before or after mounting the inverter.
EV Charging Single Phase Inverter Guide MAN-01-00588-1.1
DIP Switch Settings
1 (left)
2 (right)
OFF
OFF
ON
OFF
OFF
ON
ON
ON
2 short beeps + 1 long beep
Chapter 3: Installing the Inverter
Maximum Allowed
AC Current from Grid
16 A
24 A
32A
40 A
Buzzer Indication
1 short beep
5 beeps
33