Figure 10 - Control Wiring Inputs - York YLAA Series Installation Operation & Maintenance

SECTION 4 – INSTALLATION
A-
A+
14
13
50
13
21
13
20
13
19
13
18
13
51
13
XTBC1
All externally supplied contacts must be
capable of switching 24VDC / 115 VAC.
Gold contacts are recommended. If sup-
plied contacts are from a Relay / Contac-
tor (Inductive Load), the coil of the Relay
/ Contactor must be suppressed. Typical
suppressor is P/N 031-00808-000.
It is possible that multiple sources of
power can be supplying the unit power
panel. To prevent serious injury or death,
the technician should verify that NO
LETHAL VOLTAGES are present inside
the panel AFTER disconnecting power,
PRIOR to working on equipment.

FIGURE 10 - CONTROL WIRING INPUTS

40
USER CONTROL WIRING INPUTS
INTERNAL WIRING TO OPTIONAL REMOTE TEMP. RESET BOARD
INTERNAL WIRING TO OPTIONAL REMOTE TEMP. RESET BOARD
FLOW SWITCH
REMOTE UNLOAD STEP 1
PWM REMOTE TEMP RESET
INTERNAL WIRING TO 2-KCR CONTROL RELAY
INTERNAL WIRING TO 1-KCR CONTROL RELAY
REMOTE START / STOP
FORM 150.72-ICOM6
ISSUE DATE: 12/29/2017
LD13130
The unit evaporator heater uses 120VAC.
Disconnecting 120VAC power from the
unit, at or below freezing temperatures,
can result in damage to the evaporator
and unit as a result of the chilled liquid
freezing.
JOHNSON CONTROLS