SECTION 3 – HANDLING AND STORAGE
FIGURE 7 - WARNING
Rigging and lifting should only be done by
a professional rigger in accordance with a
written rigging and lifting plan. The most
appropriate rigging and lifting method
will depend on job specific factors, such
as the rigging equipment available and
site needs. Therefore a professional rig-
ger must determine the rigging and lifting
method to be used and it is beyond the
scope of the manual to specify rigging
and lifting details.
34
LIFTING WEIGHTS
See the unit nameplate for unit shipping weight. Note
that weight may vary depending on unit configuration
at the time of lifting. See page 50 for further informa-
tion regarding shipping and operating weights.
FORM 150.72-ICOM6
ISSUE DATE: 12/29/2017
LD18119
JOHNSON CONTROLS