Summary of Contents for Winegard ConnecT WF1xT Series
Page 1
Register your product at winegard.com/myantenna For help, email help@winegard.com or call 1-800-320-9992 Place label here www.winegard.com/connect Manuel disponible en français au www.winegard.com/connect Manual disponible en español en www.winegard.com/connect 2452392 Rev2 5/18 For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281...
Maintenance: • When first setting up the Winegard ConnecT it is recommended to check for software updates the first time the system is connected to an internet signal. Periodically check the ODU to It is also recommended to check for updates every couple months for fixes ensure all connections are tight.
Page 3
Ethernet cable into the vehicle. Make sure the cable is accessible *If you need longer Ethernet cable, from the area where the power inserter will be located. please visit www.winegard.com/connect/ connect-parts to place an order. Add a bead of sealant around the hole for the cable. Place the provided cable entry plate over the hole and cable.
Blink pressed for 10 seconds. from the LAN port on the PoE to the Ethernet connection on your device. Winegard recommends not using an Ethernet cable longer than 50 feet. The Winegard PoE is connected to Slow Red something other than the ODU in the Blink Lastly, there are 8 mounting eyelets on the PoE.
Figure 7 Winegard ConnecT 4G1xT ONLY (Winegard Data Plan Only) The Winegard ConnecT 4G1xT can access the internet two different ways: from a local WiFi network or a 4G LTE network. To connect to a 4G LTE network, select 4G LTE Only from the internet access menu.
(AES). Other options are available on this screen. Guest Network The Winegard ConnecT provides a simple way to set up an extra network that doesn’t have access to the Status Screen. This allows you to provide guests with an easier password to use when accessing your network while still Figure 13 maintaining a secure system.
Do not use the existing WiFi password for the ADMIN PASSWORD. UPDATING THE SOFTWARE When first setting up the Winegard ConnecT it is recommended to check for software updates the first time the system is connected to an Internet signal.
Page 8
Unlike some other hotspot data plans, the Carriers Network Settings you will Winegard plan allows you to decide what data plan is right for you in a given need an internet connection. Please 30 days and will not charge overages or throttle your speeds at any point.
Page 9
SIM card in the CELLULAR APN field. Also, be sure that the Winegard APN check box is NOT checked. See Figure 20. Figure 21 CELLULAR PROVIDER APN (ACCESS POINT NAME) AT&T...
PoE for 30 seconds. This will return the unit to its factory settings. My default SSID does not appear When the Winegard ConnecT first powers on or has reset for any reason, it stops broadcasting the SSID. It on my device when I search for it.
Page 11
Changes and technological advances are continuously being made in the wireless market. Information provided in this manual was accurate at time of printing. If the Winegard ConnecT antenna does not function as expected, please contact Winegard Company at 1-800-320-9992, email help@winegard.com, or visit our website at www.winegard.com/connect.
Winegard is a registered trademark of Winegard Company. Disclaimer: Although every effort has been made to ensure that the information in this manual is correct and complete, no company shall be held liable for any errors or omissions in this manual. Information provided in this manual was accurate at time of printing. If the antenna does not function as expected, please contact Winegard Co.