Heat Sink - HP Chromebook 11A G6 Education Edition Maintenance And Service Manual

Heat sink

Table 5-8 Heat sink description and part number
Description
Heat sink (includes replacement thermal material)
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly
2. Remove the keyboard/top cover (see
3. Disconnect the battery cable from the system board (see
4. Remove the system board (see
Remove the heat sink:
1. Turn the system board upside down with the front toward you.
2. Remove the two Phillips M2.0 × 2.0 broadhead screws (1) that secure the heat sink to the system board.
3. Remove the heat sink (2).
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system
board components each time the heat sink is removed. Replacement thermal material is included with the
heat sink and system board spare part kits.
Thermal paste is used on the processor (1) and the heat sink section (2) that services it.
38 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Keyboard/top cover on page
System board on page 35).
Spare part number
L46576-001
22).
23).
Battery on page 28).