Usb Port Board Cable - HP Chromebook 11A G6 Education Edition Maintenance And Service Manual

USB port board cable

NOTE: The USB port board spare part kit does not includes the USB port board cable. The USB port board
cable is included in the Cable Kit, spare part number L14906-001, and includes double-sided adhesive.
Before removing the USB port board cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the keyboard/top cover (see
3. Disconnect the battery cable from the system board (see
Remove the USB port board cables:
1. If a protective tab covers the connectors, lift the tab.
2. Release the two reverse ZIF connectors (1) to which the USB port board cables are connected, and then
disconnect the USB port board cables from the USB port board.
3. Release the two reverse ZIF connectors (2) to which the USB port board cables are connected, and then
disconnect the USB port board cables from the system board.
4. Remove the USB port board cables (3).
Reverse this procedure to install the USB port board cable.
(Preparation for disassembly on page
Keyboard/top cover on page
Battery on page
22).
23).
28).
Component replacement procedures 33