Touchpad - HP Chromebook 11A G6 Education Edition Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is included in
the Cable Kit, spare part number L14906-001, and includes double-sided adhesive.
Table 5-2 TouchPad description and part number
Description
TouchPad
Before removing the TouchPad, follow these steps:
1. Prepare the computer for disassembly
2. Remove the keyboard/top cover (see
Remove the TouchPad:
1. Disconnect the cable from the TouchPad ZIF connector
2. Release the shielding material (1) that covers the top edge of the TouchPad.
3. Remove the three Phillips M2.0 × 2.5 screws (2) that secure the TouchPad and TouchPad bracket to the
keyboard/top cover.
4. Remove the three Phillips M2.0 × 2.0 broadhead screws (3) that secure the TouchPad to the
keyboard/top cover.
5. Remove the TouchPad bracket (4).
The TouchPad bracket is available using spare part number L18300-001.
6. Remove the TouchPad (5).
Reverse this procedure to install the TouchPad.
(Preparation for disassembly on page
Keyboard/top cover on page
(TouchPad cable on page
Spare part number
L51914-001
22).
23).
26).
Component replacement procedures 27