38
Step 2: Commissioning and Configuring the Installation
communication between devices and the SolarEdge monitoring platform. The
default is LAN.
NOTE
The Server menu shows only the communication options installed in the
inverter.
For detailed information about all the configuration options, refer to the
Communication Options Application Note , available on the SolarEdge
website at
https://www.solaredge.com/sites/default/files/solaredge-
communication_options_application_note_v2_250_and_above.pdf
Power Control
Power control options are detailed in the Power Control Application
Note , available on the SolarEdge website at
https://www.solaredge.com/sites/default/files/application_note_power_control_
.
configuration.pdf
The Grid Control option may be disabled. Enabling it opens additional options in the
menu.
The Energy Manager option is used for setting power export limitation, as
described in the Export Limitation Application Note , available on the
SolarEdge website at
limitation_application_note.pdf
Device Manager
From the Commissioning menu, select Device Manager to configure various system
Smart Energy Management devices.
For more information refer to
.
control#/
Maintenance
From the Commissioning menu, select Maintenance to configure various
system settings, as described below.
https://www.solaredge.com/sites/default/files/feed-in_
.
https://www.solaredge.com/products/device-
-Three Phase System Installation Guide MAN-01-00505-1.2
.