Chapter 4: Connecting The Ac And The Strings To The Inverter; Grid Connection Guidelines - SolarEdge SE5K Installation Manual

30 Chapter 4: Connecting the AC and the Strings to the Inverter
Chapter 4: Connecting the AC and the Strings
to the Inverter
This chapter describes how to connect the inverter to the AC grid, and to the strings of
modules with power optimizers.
If using an inverter with a DC Safety Unit, refer to the instructions in Connecting the AC
and DC Strings to the DC Safety Unit on page 68.
Refer to the technical specifications provided with the inverter.

Grid Connection Guidelines

In most countries, three phase inverters require neutral connection at all times.
In some countries, the three phase inverters can be connected to delta grids; in
other cases, multiple single phase inverters can be used.
Prior to system installation, refer to:
Three Phase Inverters for Delta Grids application note at
https://www.solaredge.com/sites/default/files/se_three_phase_
inverters_for_delta_grids.pdf
Supported Countries application note to confirm compatibility at
http://www.solaredge.com/sites/default/files/se_inverters_
supported_countries.pdf
may void the inverter warranty.
For more wiring information refer to the SolarEdge
Recommended AC Wiring Application Note , available on the
SolarEdge website at
note-recommended-wiring.pdf
For recommended circuit breaker size per model refer to
Determining the Circuit Breaker Size on page 82
; installing without confirmation
http://www.solaredge.com/files/pdfs/application-
.
-Three Phase System Installation Guide MAN-01-00505-1.2