Unit Rigging; Lifting Weights; Figure 7 - Unit Rigging/Lifting (Ycal0019 - 0033 Single Circuit Models Only) - York YCAL0019 Installation, Operation And Maintenance Manual

SECTION 3 – HANDLING AND STORAGE

Lifting Weights

For details of weights and weight distribution, refer to
the data shipped in the chiller information packet and
unit nameplate.
FIGURE 7 - UNIT RIGGING/LIFTING (YCAL0019 – 0033 SINGLE CIRCUIT MODELS ONLY)
36
48.00 in.
Forks must extend beyond the width of the unit for proper
lift. The thickness of the fork blade must be smaller then
the opening of the lifting hole. Improper fork positioning
could result in damage to the unit.

UNIT RIGGING

Lifting Instructions are placed on a label on the chiller
and on the shipping bag.
FORM 150.67-NM1
ISSUE DATE: 4/28/2017
JOHNSON CONTROLS