In Commissioning chapter:
l
Updated the activation sequence
o
Removed RS232 reference
o
Rapid shutdown (PVRSS):
l
Added important safety information notes and warnings
o
For a compliant PV Rapid Shutdown installation, use no more than 30 optimizers per string.
o
Enabling PVRSS from the inverter menu is only required if the installed optimizers were
o
manufactured before 2015, otherwise it is enabled by default.
Added testing PVRSS functionality after pairing
o
In Configuration Menu Options:
l
Communication section:
o
Removed RS232 Conf
n
Added GSM Conf
n
Power Control section:
o
Removed Phase Balance link and info
n
Added a note about compliance with UL 1741 Supplement A.
n
Added link to P(Q) diagram application note
n
Maintenance section:
o
Added links to application notes (Upgrading the inverter using SD card; Isolation fault
n
troubleshooting; Arc fault detection)
Removed Optimizer Conf
n
Status Screens updates:
l
Meter status screen - added Power and Energy lines
l
Telemetry status screen - updated
l
GSM status screen - new
l
Communication options - updated
l
Inverter cover removal sequence - updated
l
Added link to Arc Detection application note
l
Troubleshooting:
l
Error codes moved to a separate document. A link was added to the manual.
o
Slave Detect and Slave List - updated
o
Updated the technical specification document
l
Removed Inverter Arc Detection and Interruption appendix
l
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00306-1.1
Revision History
3