Sp7-Xxx (Data Log) - Ricoh Aficio MP 1600L2 Field Service Manual

3. Appendix: SP Mode Tables
ADF Adjustment (StoS/Rear Regist)
6006 4
Adjusts the side-to-side registration for the rear side of duplex originals, for ADF mode.
Use the
ADF Adjustment (Sub-scan Magnif)
6006 5
Adjust the sub-scan magnification for the ADF.
ADF Adjustment (Original Curl Adj)
3
6006 6
Enables or disables the skew adjustment for the reverse sides of originals. When you enable
SP6-006-6, adjust the distance of the skew adjustment (SP 6006 7).
ADF Adjustment (Skew Correction)
6006 7
Specifies the distance of the skew adjustment. SP 6006 7 is effective when you enable SP
6006 6 (ADF Adjustment [Original Curl Adj]).
6009 ADF Free Run
6009 1 Performs an ADF free run. Press "ON" to start; press "OFF" to stop.
6010 Stamp Position Adjustment
6010 1 Adjusts the stamp position in the sub-scan direction. for the fax mode.
6901 Display ADF/APS
Displays the status of the ADF original size sensors (
6901 1
(SP 6901)).
6910* ADF Shading Time
Adjusts the interval used for the shading processing in the ADF mode. Light and heat in the
6910 1 room may affect the scanner response. Reduce this setting if copy quality indicates that the
white level is drifting during ADF copy jobs.

SP7-XXX (Data Log)

7001* Total Operation
7001 1 Shows the total operation time (total drum rotation time).
42
key to select "+" or "–" before entering the value.
[0 to 60 / 10 / 1 s/step]
[–5.0 to +5.0 / 0.0 / 0.5 mm/step]
[–0.9 to +0.9 / 0.0 / 0.1 %/step]
[0 = No / 1 = Yes]
[–20 to +20 / 0 / 1 mm/step]
[–10 to +10 / 0 / 1 mm/step]
ADF APS Sensor Output Display