Sp5-Xxx (Mode) - Ricoh Aficio MP 1600L2 Field Service Manual

3. Appendix: SP Mode Tables

SP5-XXX (Mode)

5001 All Indicators On
All LEDs turn on. The LCD turns on or off every 3 seconds. Press the reset key to end this
5001 1
program.
5045* [Accounting count]
3
5045 1 Selects the counting method to either developments or prints.
5104* A3/DLT Double Count
Selects whether the machine counts twice for each sheet of A3/11"x 17". If this is set to
5104 1 "Yes" is selected, the total (mechanical) counter and the current user counter will both
increment by two for each A3/11" x 17" sheet.
5113* Optional Counter Type
5113 1 Selects the corresponding key for installed devices such as coin lock.
5120* Clr-OP Count Remv
Determines under which conditions the copy job settings are reset when the key counter is
removed. With 0, the settings are cleared if the counter is removed at the end of a job or
5120 1 midway through a job. With 1, they are only cleared if the counter is removed at the end
of a job. With 2, they are not cleared at all, under either condition. With duplex copies,
the job settings are always preserved, regardless of the setting of this SP mode.
5121* Count Up Timing
Selects whether the key counter increments at time of paper feed-in or at time of paper
5121 1
exit.
5127* APS Mode
38
[0 to 1 / 1 / -]
0: Developments, 1: Pages
[0 = Enabled / 1 = Disabled /
2 = Disabled if the size is undetected]
0: None
11: MF key card (Increment)
12: MF key card (Decrement)
[0=Yes / 1=Standby only / 2=No]
[0 = Feed In / 1 = Exit]
[0 = Enabled / 1 = Disabled]