4. Replacement and Adjustment
Pick-off Pawls and Toner Density Sensor
• Do not turn the PCU upside down. This causes toner and developer to spill out.
4
1. PCU (
p.101)
2. Pawl [A]
• Pull down the pawl and release the bottom end.
3. Toner density sensor [B] ( x 1)
• The toner density sensor is taped to the bottom of the PCU. Pry it off with a regular screwdriver
4. After reinstalling the pick-off pawls or toner density sensor, adjust the image quality (
Replacement or Adjustment").
102
p.106 "After