Classification Of Safety--Related Notices - Siemens 6DR55 Series Manual

Information for the operator
0.2

Classification of safety--related notices

!
!
8
This manual contains the information required for use as intended of
the product it describes. It is addressed to technically qualified
personnel specially trained or having relevant knowledge of
instrumentation and control technology, hereafter called automation
technology.
Familiarity with and proper technical observance of the safety notes
and warnings contained in this manual are essential for safe installation
and commissioning and for safety in operation and maintenance of the
product described. Only qualified personnel as defined in Chapter 0.3
has the necessary specialist knowledge to interpret the general safety
notes and warnings given in this document in specific cases and to
take the necessary action.
The documentation supplied with the instrument is listed in Chapter
0.5.
This manual is not a permanent part of the scope of supply. For
reasons of clarity, it does not contain every detail about every version
of the product described and cannot take every eventuality in
installation, operation, maintenance and use in systems into account. If
you require further information or if problems occur that have not been
dealt with in sufficient detail in this document, please request the
required information from your local Siemens office or the office
responsible for you.
Functionality, commissioning and operation are described in this
manual.
Please pay special attention to the Warning and Note texts. These are
separated from the remaining text by horizontal lines and specially
marked with symbols (see Chapter 0.2).
This manual contains notices which you should observe to ensure your
own personal safety, as well as to protect the product and connected
equipment. These notices are highlighted in the manual by a warning
triangle and are marked as follows according to the level of danger:
DANGER
indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
SIPART PS2 PA Manual
A5E00127926--05