Related Manuals for Behringer EUROLIVE Series
Summary of Contents for Behringer EUROLIVE Series
- Page 1 All manuals and user guides at all-guides.com User’s Manual Version 1.2 June 2001 F1220 F1520 B1020 B1220 B1520 B1500X B1800X www.behringer.com...
- Page 2 Thank you. Caution! EUROLIVE speakers are not designed to be suspended! EUROLIVE SERIES enclosures are designed exclusively for floor-mounted use. Although the enclosures will withstand rough handling over many years, they are not designed to be suspended. If suspension of the speakers is unavoidable, please be sure that suitable fixtures are mounted by qualified personnel.
- Page 3 Designing the new EUROLIVE SERIES was a great challenge filled with responsibility, which we tackled by focusing on you, the discerning user and musician. It was also a lot of work, with night and weekend shifts.
- Page 4 Floor wedges allow angles of 30 or 60 degrees s Professional Speakon connectors on sturdy aluminum panel ® s Enclosures constructed entirely of environmentally-friendly E1 MDF wood s The EUROLIVE SERIES includes floor wedges, full-range enclosures and subwoofers s Manufactured under the stringent BEHRINGER quality control system...
-
Page 5: Table Of Contents
7. WARRANTY ........................... 11 ATTENTION! The EUROLIVE SERIES loudspeakers are capable of producing extreme volumes. Please bear in mind, that high sound pressures do not only temporarily damage your sense of hearing, but can also cause permanent damage. Be careful to select a suitable volume. -
Page 6: Introduction
With its numerous features, the EUROLIVE SERIES represents an ideal P.A. loudspeaker system for a variety of applications, from churches and schools to clubs to larger venues. We designed the EUROLIVE SERIES to provide you with a complete range of speaker enclosures with consistent quality plus all the options you need to expand your P.A. -
Page 7: Optimum Performance
EUROLIVE SERIES 2. OPTIMUM PERFORMANCE The EUROLIVE SERIES was designed for use in a variety of applications. Naturally, the sound of your speaker enclosures largely depends on the acoustic properties of the environment in which it is used. The following points should help you get the most out of your EUROLIVE speaker system. -
Page 8: Bi-Amping Operation
3.2.2 Selecting the crossover frequency For operation with an external crossover network such as our BEHRINGER SUPER-X PRO CX2310, please refer to chapter 6 “SPECIFICATIONS” for recommended crossover frequencies. We recommend using a slope of at least 12 dB—higher values will improve performance. A slope of 24 dB is ideal. -
Page 9: Bi-Amping Operation
All manuals and user guides at all-guides.com EUROLIVE SERIES 4.2 BI-AMPING operation Use the switch on the rear panel of the enclosure to select BI-AMP. Again, you have to remove the frame first (see chapter 4.1). Assign the low-frequency signal to pins 1-/1+ and the high frequency signal to pins 2-/2+ by modifying your connection cable(s). -
Page 10: Specifications
6. SPECIFICATIONS BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or shown. -
Page 11: Warranty
(user included) will void the warranty. shall, at its sole discretion, either repair or replace the product. 6. If an inspection of the product by BEHRINGER shows that the 2. If the warranty claim proves to be justified, the product will be defect in question is not covered by the warranty, the inspection returned to the user freight prepaid.