Initial Setup Process - Winegard WF2-35B Installation & Operation Manual

Initial Setup Process

The Winegard Connected app
the product.
WARNING: FOR FIRST TIME USERS – The initial setup requires an internet
connection to pair the device with a newly created account. Do not connect directly
to the local network (shown on the front of this manual) of your ConnecT 2.0 Runs
with Togo Device. You will be instructed when to connect during the initial account
setup process.
1. From your mobile device or tablet, download the free Winegard Connected
app either in the iOS App Store or the Google Play Store. Once the download is
complete, open the app.
2. Turn the power switch to the ConnecT 2.0 to the ON position. This will either
be a rocker (on/off) switch or a push button on the right side of the wall plate as
seen in the previous Installation (Option A) section of this manual (pg. 4).
NOTE: Not all RVs are wired the same way. Consult your RV manufacturer if
either this switch or button cannot be found.
3. In order to use the Winegard ConnecT 2.0 unit you must accept the Winegard
Terms and Conditions. To view the full Privacy Policy and Terms of Use please
select the link in the app or visit http:www.winegard.com/about/privacy-policy.
4. After the Terms and Conditions are accepted, a screen with the
message "No devices have been detected. Please choose a method to
connect to a new device." will appear. Once this message disappears,
click on the Add Device QR Code button.
NOTE: You may get a message asking to allow the Connected app access
to your device's camera. You will need to allow access in order to complete
the setup.
5. After selecting the Add
Device icon, a message
will appear stating "You
must be signed in order to
use this feature. You will
automatically be taken to the
account page to sign in with
Togo." Click on the Sign in
with Togo ID button. Review
Togo's Privacy Policy (you
must agree to the terms of
use). If you already have a
Togo account simply sign in
and skip to step 7. If not,
click on the link to create
one (see step 6).
6
must be downloaded first before using
Winegard
Connected App