Siemens SIPART Series Operating Instructions Manual page 85

5.1.4.3 Option modules Ex i/Ex n/Ex t
Which option module is fitted in which positioner
The order number of the positioner is present on its nameplate. This coded order number
indicates which option module is already installed in your device. The following table lists the
assignment between positioner and installed option module.
List of option modules fitted in positioners with the following types of protection:
● Intrinsic safety "Ex i"
● Non-incendive "Ex nA"
● Protection by enclosure "Ex t"
Positioner
6DR5..a-0b.1.-0.A.
6DR5..a-0b.2.-0.A.
6DR5..a-0b.3.-0.A.
6DR5..a-0b..1-0.A.
6DR5..a-0b..2-0.A.
6DR5..a-0b..3-0.A.
a = 0; 1 or 2
b = E, D, F, G, K
The captions of the following connection graphics for the option modules are made up of the
name and order number of the option module.
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11
Contains the following installed option
module
Alarm module ATEX; alarm module
FM/CSA
SIA module
Mechanical limit switch module
I module ATEX; I module FM/CSA
y y
I module ATEX; I module FM/CSA
y y
EMC filter module
Connection
5.1 Electric
Order number for installed
option module
6DR4004-6A; 6DR4004-7A
6DR4004-6G
6DR4004-6K
6DR4004-6J; 6DR4004-7J
6DR4004-6J; 6DR4004-7J
C73453-A430-D23
83