Siemens SIPART Series Operating Instructions Manual page 73

5.1.1.1 Standard cable gland/torque
Note
Standard cable gland/torque
Device damage.
• Owing the reasons pertaining to tightness (IP enclosure rating) and the required tensile
• In the NPT version, the positioner is delivered with a coupling. When inserting a counter
5.1.2 Electrical connections
Connecting terminals of the basic device, the I
at the left front edges, and are arranged in a staircase-shape.
The module cover protects components from being pulled out and prevents an incorrect
assembly.
①
②
Figure 5-2
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11
strength, only use the cables having a diameter ≥ 8 mm for standard M20x1.5 cable
gland, or use a suitable seal insert in case of smaller diameters.
piece in the coupling, ensure that the maximum permissible torque of 10 Nm is not
exceeded.
Connecting terminals of option modules
Connecting terminals of basic device
Connecting terminals of the flameproof enclosure
module, and the alarm module are provided
y
Connection
5.1 Electric
71