Siemens SIPART Series Operating Instructions Manual page 55

Overview diagram: Installing the optional modules in the "flameproof enclosure" version
①
Module cover
②
Fixing screws module cover
③
Ribbon cable/connector for fitted potentiometer or
external position detection system
④
Ribbon cable/connector for alarm module
⑤
Ribbon cable/connector for I
⑥
Basic electronics
⑦
Alarm module
⑧
I module
y
⑨
Screw cap
⑩
Adapter
Figure 4-11 Installing the optional modules in the "flameproof enclosure" version
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11
module
y
⑪
Transmission ratio selector
⑫
Fixing screws adapter
⑬
Safety catch
⑭
Friction clutch adjustment wheel
⑮
Feedback shaft
⑯
Ring gear
⑰
Enclosure
⑱
Feedback lever bracket with pin
⑲
Pin (feedback lever bracket)
Installing/mounting
4.7 Installing option modules
53