Siemens SIPART Series Operating Instructions Manual page 262

Spare parts/accessories/scope of delivery
14.1 Overview
● SIA module: one binary output for fault messages, two binary outputs for limit monitors
● Mechanical limit switch module with two switches and one alarm output.
The mechanical limit switch module cannot be used in device versions with flameproof
enclosure. Likewise, its use in zones 2 or 22 is not permitted.
Accessories
● Pressure gauge block: 2 or 3 pressure gauges for single and double-acting positioners
● Mounting flange (NAMUR) for safety pneumatic block
● Mounting kits for linear and part-turn actuators
For separate mounting of positioner and position sensor
● External position sensing system
● Non contacting sensor (NCS)
Note
The version is identified using a special nameplate.
260
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11