Siemens SIPART Series Operating Instructions Manual page 239

12.3 Construction
Construction
How does it work?
Range of stroke (linear actuator)
•
Angle of rotation (part-turn actuator)
•
Mounting method
On the linear actuator
•
On the part-turn actuator
•
Weight, basic device
Glass-fiber reinforced polycarbonate housing
•
Aluminum enclosure
•
Stainless steel enclosure
•
Flameproof aluminum enclosure
•
Material
Enclosure
•
6DR5..0-... (Makrolon)
6DR5..1-... (aluminum)
6DR5..2-... (stainless steel)
6DR5..5-... (aluminum, flameproof)
Pressure gauge block
•
Versions
In Makrolon enclosure
•
In the aluminum enclosure
•
In flameproof aluminum enclosure
•
In the stainless steel enclosure
•
Torques
Part-turn actuator fixing screws DIN 933 M6x12-A2
•
Linear actuator fixing screws DIN 933 M8x16-A2
•
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11
Technical data
12.3 Construction
3 ... 130 mm (0.12 ... 5.12") (angle of
positioner shaft 16 ... 90°)
30 ... 100°
Using mounting kit 6DR4004-8V and,
where necessary, an additional lever
arm 6DR4004-8L on actuators
according to IEC 60534-6-1 (NAMUR)
with rib, bars or flat face.
Using mounting kit 6DR4004-8D on
actuators with mounting plane
according to VDI/VDE 3845 and
IEC 60534-6-2: The required mount
must be provided on the actuator-side.
Approx. 0.9 kg (1.98 lb)
Approx. 1.3 kg (2.86 lb)
Approx. 3.9 kg (8.6 lb)
Approx. 5.2 kg (11.46 lb)
Glass-fiber reinforced polycarbonate
(PC)
GD AISi12
Austenitic stainless steel mat. No.
1.4581
GK AISi12
Aluminum AIMgSi, anodized
Single-acting and double-acting
Single-acting
Single-acting and double-acting
Single-acting and double-acting
5 Nm (3.7 ft lb)
12 Nm (8.9 ft lb)
237