Siemens SIPART Series Operating Instructions Manual page 159

Overview parameter J
Parameter Function
J. TMAX Monitoring of the upper limit temperature with the following parameters:
J1.TUNIT Temperature unit
J2.LEVL1 Threshold 1
J3.LEVL2 Threshold 2
J4.LEVL3 Threshold 3
Overview parameter L
Parameter Function
L. STRK Monitoring the path integral with the following parameters:
L1. LIMIT Limit for the number of changes of direction
L2.FACT1 Factor 1
L3.FACT2 Factor 2
L4.FACT3 Factor 3
Overview parameter O
Parameter Function
O. DCHG Monitoring the changes in direction with the following parameters:
O1.LIMIT Limit for the number of changes of direction
O2.FACT1 Factor 1
O3.FACT2 Factor 2
O4.FACT3 Factor 3
Overview parameter P
Parameter Function
P. PAVG Position mean value calculation with the following parameters:
P1.TBASE Time base of the mean value generation
P2.STATE State of the position mean value calculation
P3.LEVL1 Threshold 1
P4.LEVL2 Threshold 2
P5.LEVL3 Threshold 3
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11
Parameter values
°C °F
-40 ... 75 ... 90 -40 ... 194
-40 ... 80 ... 90 -40 ... 194
-40 ... 90 -40 ... 194
Parameter values
1 ... 1E6 ... 1E8
0.1 ... 1.0 ... 40.0
0.1 ... 2.0 ... 40.0
0.1 ... 5.0 ... 40.0
Parameter values
1 ... 1E6 ... 1E8
0.1 ... 1.0 ... 40.0
0.1 ... 2.0 ... 40.0
0.1 ... 5.0 ... 40.0
Parameter values
0.5h / 8h / 5d / 60d / 2.5y
IdLE / rEF / ###.# / Strt
0.1 ... 2.0 ... 100.0
0.1 ... 5.0 ... 100.0
0.1 ... 10.0 ... 100.0
Parameterizing/addressing
9.3 Overview of parameters
Unit
°C/°F
Unit
Unit
Unit
%
%
%
157