Siemens SIPART Series Operating Instructions Manual page 158

Parameterizing/addressing
9.3 Overview of parameters
Parameter Function
d4.FACT3 Factor 3
Overview parameter E
Parameter Function
E. DEBA Deadband monitoring with the following parameters:
E1.LEVL3 Threshold
Overview parameter F
Parameter Function
F. ZERO Zero point monitoring with the following parameters:
F1.LEVL1 Threshold 1
F2.LEVL2 Threshold 2
F3.LEVL3 Threshold 3
Overview parameter G
Parameter Function
G. OPEN Displacement of the upper stop with the following parameters:
G1.LEVL1 Threshold 1
G2.LEVL2 Threshold 2
G3.LEVL3 Threshold 3
Overview parameter H
Parameter Function
H. TMIN Monitoring of the lower limit temperature with the following parameters:
H1.TUNIT Temperature unit
H2.LEVL1 Threshold 1
H3.LEVL2 Threshold 2
H4.LEVL3 Threshold 3
156
Parameter values
0.1 ... 10.0 ... 100.0
Parameter values
0.1 ... 2.0 ... 10.0
Parameter values
0.1 ... 1.0 ... 10.0
0.1 ... 2.0 ... 10.0
0.1 ... 4.0 ... 10.0
Parameter values
0.1 ... 1.0 ... 10.0
0.1 ... 2.0 ... 10.0
0.1 ... 4.0 ... 10.0
Parameter values
°C °F
-40 ... -25 ... 90 -40 ... 194
-40 ... -30 ... 90 -40 ... 194
-40 ... 90 -40 ... 194
Operating Instructions, 10/2013, A5E00074631-11
Unit
Unit
%
Unit
%
Unit
%
Unit
°C/°F
SIPART PS2 with and without HART