Siemens SIPART Series Operating Instructions Manual page 156
Electropneumatic positioners with and without hart
Hide thumbs
Also See for SIPART Series:
- Compact operating instructions (35 pages) ,
- Operating instructions manual (44 pages)
Table of Contents
Advertisement
Parameterizing/addressing
9.3 Overview of parameters
9.3.3
Overview parameters A to P
Introduction
These parameters are used to set the extended diagnostic functions of the positioner.
Note
Factory setting
Factory-set parameter values are printed in bold in the following table.
Note
Display
Parameters A to P and their sub-parameters are only displayed when the extended
diagnostics has been activated using parameter "XDIAG" with parameter value "On1", "On2"
or "On3".
154
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11
Advertisement
Table of Contents
