Siemens SIPART Series Operating Instructions Manual page 133

Aborting the manual initialization process
1. Press the
2. Exit the "Configuration" mode. To do this, press the
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11
button. The display shows the "5.INITM" parameter. The positioner is in the
"Configuration" mode.
software status is displayed. After releasing the
mode". The positioner is not initialized.
7.4 Commissioning linear actuators
button for at least 5 seconds. The
button, the positioner is in "P manual
Commissioning
131