Aborting the automatic initialization process
1. Press the
2. Exit the "Configuration" mode. To do this, press the
See also
Sequence of automatic initialization (Page 117)
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11
button. The display shows the following:
The positioner is in the "Configuration" mode.
The software status is displayed.
After releasing the
button, the positioner is in "P manual mode". The positioner is not
initialized.
Commissioning
7.4 Commissioning linear actuators
button for at least 5 seconds.
127