Siemens SIPART Series Operating Instructions Manual page 106

Operating
6.2 Operating modes
Function of buttons:
● The
● The
button to move the actuator in manual mode.
● The
button to move the actuator in manual mode.
Note
Order
Parameters are activated in the reverse order when the
simultaneously.
6.1.3 Firmware version
The current firmware version is displayed when you exit the configuration menu.
Figure 6-2
6.2 Operating modes
6.2.1 Overview of operating modes
You have five operating modes at your disposal to operate the positioner:
1. P-manual mode (as-delivered condition)
2. Configuration and initialization mode
3. Manual mode (MAN)
4. Automatic (AUT)
5. Diagnostics
104
button is used to select the modes and to forward the parameters.
button is used to select parameter values when configuring. You can use this
button is also used to select parameter values when configuring. You can use this
Firmware version, e.g. Version 4.00.00
and buttons are pressed
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11