Chapter 7: User Interface; Lcd User Buttons - SolarEdge StorEdge SE5000-xxS0 series Installation Manual

Chapter 7: User Interface

Chapter 7: User Interface

LCD User Buttons

Four buttons are located inside the inverter above the LCD panel and are used for controlling the LCD
menus, as shown below:
Use the four user buttons to control the LCD panel menus:
Esc: Moves the cursor (>) to the beginning of the currently displayed parameter; goes to the previous
l
menu, and cancels a value change with a long press (until Aborted is displayed).
Up and Down: Moves the cursor from one menu option to another, moves among the characters of
l
a displayed parameter, and toggles between possible characters when setting a value.
: Selects a menu option and accepts a value change with a long press (until Applied is displayed).
l
The LCD screen displays status information of the system and various menus for configuration options.
The LCD panel and buttons are used during the following processes:
Operational mode: The LCD panel allows checking for proper system o peration. Refer to Status
l
Screens - Operational Mode on page 52 for a description of this option. .
Setup mode: Upon installation, an installer may perform basic configuration
l
Error messages: In the event of a problem, an error message may be displayed on the LCD panel.
l
42
SolarEdge StorEdge -Single Battery/High Capacity Installation MAN-01-00283-1.1
Figure 27: LCD Internal menu buttons