Heat Sink Assembly - HP 15 Series Maintenance And Service Manual

Heat sink assembly

Table 6-13 Heat sink assembly descriptions and part numbers
Description
Heat sink for use in models with AMD Ryzen processors and discrete graphics
Heat sink for use in models with AMD A6/A9 processors and discrete graphics
Heat sink for use in models with AMD Ryzen processors and integrated UMA graphics
Heat sink for use in models with AMD A6/A9 processors and integrated UMA graphics
Heat plate for use in fanless models with AMD E2-9000e processors
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
To remove the heat sink assembly from products with integrated UMA graphics:
1. In the order indicated on the heat sink assembly, remove the four Phillips M2.0 × 3.0 screws (1) that
secure the heat sink to the computer.
2. Lift the heat sink assembly from the computer (2).
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page 41).
34).
38).
Component replacement procedures
Spare part number
L20482-001
L20484-001
L20483-001
L20491-001
L20494-001
33).
57