Solid-State Drive - HP 15 Series Maintenance And Service Manual

Solid-state drive

Table 6-5 Solid-state drive descriptions and part numbers
Description
256 GB, PCIe, NVMe
256 GB, SATA-3, TLC
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the solid-state drive:
Remove the Phillips M2.0 × 3.0 screw (1), and then pull the solid-state drive module from the socket (2).
▲
Reverse this procedure to install the solid-state drive.
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page 41).
34).
38).
Component replacement procedures
Spare part number
L20384-001
L20382-001
L20381-001
33).
47