Wiring
4.1
2-Wire Connection, with terminals 6 through 10
①
Non-hazardous area
②
Hazardous area
③
Basic electronics
✓ Requires a regulated current source NOT a voltage source
✓ Unit requires at least 3.6 milliamps to power on
✓ Do NOT use the 24 volt pair of wires for the feedback card on terminals 6 and 8 (if
equipped)
✓ For hazardous areas, consult Power Specifications (Page 44) and local safety guidelines
Connect positive wire for 4 to 20 mA to terminal 6, negative wire to terminal 8.
PS2 Troubleshooting Guide
Service Manual, 03/2017, A5E36661550-AA
③
Binary input 1
④
Signal source
⑤
HART communicator
4
43