Specific Safety Precautions - HP Compaq AirLife 100 Important Product Information

Specific Safety Precautions

The following safety precautions need to be taken while using your device.
AC Adapter and Accessories
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not
attempt to power the product with a voltage converter kit sold for appliances.
Use the correct external power source: A product should be operated only from the type of
power source indicated on the electrical ratings label. If you are not sure of the type of power
source required, call Customer Care, your service partner, or local power company. For a
product that operates from battery power or other sources, refer to the operating instructions
that are included with the product.
Avoid overloading the electrical circuit: Do not overload an electrical outlet, power strip, or
convenience receptacle. The overall system load must not exceed 80% of the branch circuit
rating. If power strips are used, the load should not exceed 80% of the input rating of the
power strip.
Observe extension cord ratings: If an extension cord or power strip is used, make sure that
the cord or strip is rated for the product and that the total ampere ratings of all products
plugged into the extension cord or power strip do not exceed 80% of the ampere rating limit of
the extension cord or power strip.
Use an approved AC adapter: Only the AC adapter provided with the product, a replacement
AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be
used with the product.
Unplug the power properly: Disconnect power from the product by unplugging the AC
adapter from the electrical outlet.
2 Chapter 1 Health and Safety