Safety information
2.1
Requirements for safe use
This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
2.1.1
Warning symbols on the device
Symbol
SIPART PS2 with and without HART
Operating Instructions, 09/2014, A5E00074631-12
Meaning
Consult operating instructions
Hot surface
Isolate the device from power using a circuit-breaker
Protect the device from shocks (otherwise the specified de-
gree of protection is not guaranteed)
Protective insulation; device in protection class II
2
15