Adding A Memory Module - HP Compaq Series Hardware Manual

Adding a Memory Module

1. Follow the procedures in the
2. To insert the new memory module into either memory slot:
a. Align the keyed (notched) edge of the module 1 with the
keyed area in the expansion slot.
b. Press the module into the slot from a 45-degree angle
until it is seated, then press the module 2 downward until
the retention clips snap into place.
3. Replace the memory slot cover.
4. Replace the keyboard and snap the 4 keyboard latches back
into place.
5. Replace the keyboard access screws located on the bottom of
the notebook.
6. Replace any battery packs that were removed at the beginning
of this procedure.
7. Reconnect external power and external devices.
8. Turn on the notebook.
Hardware Guide
Hardware Upgrades
"Before You Begin" section.
8–12