Removing A Drive From The Multibay - HP Compaq Series Hardware Manual

Removing a Drive from the MultiBay

Ä
CAUTION: To prevent system lockup and loss of information, stop the
drive before removing it. To stop the drive:
Windows XP—Select the Safely Remove Hardware icon on the
taskbar, then select the drive you want to remove. When it is safe to
remove the drive, a message is displayed. (To display taskbar
icons, select Show Hidden Icons in the system tray.)
Windows 2000—Select the Unplug or Eject Hardware icon on
the taskbar, then select the drive you want to remove. When it is
safe to remove the drive, a message is displayed.
Ä
CAUTION: To protect the MultiBay when no device is inside, insert the
weight saver in the bay. This device prevents damage to the MultiBay
and does not increase notebook weight.
1. If the drive has a media tray, extend it, remove any media,
then close the tray.
2. Stop the drive as instructed in the preceding caution.
3. Turn the notebook upside down.
4. Slide the MultiBay release latch 1 toward the rear of the
notebook.
5. Pull the drive or drive assembly 2 out of the MultiBay.
Hardware Guide
Drives
4–9