Design Parameters - York YCAL Series Manual

Design Parameters

JOHNSON CONTROLS
LEAVING WATER
YCAL
TEMPERATURE (°F)
MIN
0019EE 40
0022EE 40
0028EE 40
0033EE 40
0043EE 40
0046EE 40
0052EE 40
0056EE 40
0066EE 40
LEAVING WATER
YCAL
TEMPERATURE (°C)
MIN
0019EE 4.4
0022EE 4.4
0028EE 4.4
0033EE 4.4
0043EE 4.4
0046EE 4.4
0052EE 4.4
0056EE 4.4
0066EE 4.4
NOTES:
1. For leaving brine temperature below 40°F (4.4°C), contact your nearest Johnson Controls Office for ap-
plication requirements.
2. For leaving water temperature higher than 55°F (12.8°C), contact the nearest Johnson Controls Office for
application guidelines.
3. The evaporator is protected against freezing to -20°F (-28.8°C) with an electric heater as standard.
4. For operation at temperatures below 25°F (-3.9°C), the optional Low Ambient Kit will need to be installed
on the system (for YCAL0043-0065 models only).
5. For operation at temperatures above 115°F (46.1°C), the optional High Ambient Kit will need to be in-
stalled on the system.
ENGLISH
COOLER
FLOW (GPM)
MAX MIN
55 10
55 10
55 10
55 10
55 40
55 40
55 60
55 60
55 60
SI UNITS
COOLER
FLOW (L/S)
MAX MIN
12.8 0.6
12.8 0.6
12.8 0.6
12.8 0.6
12.8 2.5
12.8 2.5
12.8 3.8
12.8 3.8
12.8 3.8
FORM 150.67-EG1 (219)
AIR ON
CONDENSER (°F)
MAX MIN
150 0
150 0
150 0
150 0
200 0
200 0
300 0
300 0
300 0
AIR ON
CONDENSER (°C)
MAX MIN
9.5 -17.7
9.5 -17.7
9.5 -17.7
9.5 -17.7
12.6 -17.7
12.6 -17.7
18.9 -17.7
18.9 -17.7
18.9 -17.7
MAX
125
125
125
125
125
125
125
125
125
MAX
51.7
51.7
51.7
51.7
51.7
51.7
51.7
51.7
51.7
17