Cub Crafters CC11-100 Maintenance Manual page 70

1 GENERAL
The aircraft is powered by a Teledyne-Continental Motors O-200 engine. This is an air-cooled,
four cylinder powerplant that is capable of delivering up to 100 hp at 2750 RPM.
A throttle controls power to the engine. Each crew member is provided with a throttle on the left
side of the cockpit. The air-to-fuel mixture is adjusted manually with a control on the left side of
the instrument panel. Pulling the mixture control all the way back operates a cut-off valve on the
carburetor that stops the supply of fuel to the engine. The mixture control should always be
used to stop the engine.
2 ENGINE SERVICING
Refer to Section 6.3.10 and to publications by Teledyne-Continental Motors for servicing,
maintenance, and overhaul of the engine.
3 ENGINE MAINTENANCE
No major repair or alterations, as outlined in ASTM F2483, FAR 43, or in this manual are
authorized at this time.
To obtain engineering approvals for any major repairs or alterations, please contact Cub
Crafters at:
Cub Crafters, Inc.
th
1918 South 16 Avenue
Yakima, WA. 98903
Tel: 509-248-9491
support@cubcrafters.com
5.4.9
Page: 2
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Manual number SC10000AMM
Date: 04/27/2009