Cub Crafters CC11-100 Maintenance Manual page 7

1 SCOPE
2 REFERENCE DOCUMENTS
3 TERMINOLOGY
4 SIGNIFICANCE & USE
5 AIRCRAFT MAINTENANCE MANUAL
5.1 FORMAT & GUIDANCE FOR THE
USE OF THIS MANUAL
5.1.1 GENERAL
5.1.2 LAYOUT OF THE MANUAL
5.1.3 WARNINGS, CAUTION AND
NOTES
5.1.4 REVISION SERVICE
5.2 GENERAL: SPECIFICATIONS &
DATA
5.2.1 GENERAL
5.2.2 EQUIPMENT LIST
5.2.3 PURCHASE PARTS
SOURCE LISTS
5.2.4 ENGINE SPECIFICATIONS
AND DATA
5.2.5 WEIGHT AND BALANCE
DATA
5.2.6 TIRE INFLATION
5.2.7 APPROVED OILS AND
CAPACITIES
5.2.8 RECOMMENDED
FASTENER TORQUES
5.2.9 GENERAL SAFETY
INFORMATION
5.2.10 FLIGHT SAFETY
REPORTING
INSTRUCTIONS
5.3 PERIODIC & ANNUAL INSPECTION
REQUIREMENTS
5.3.1 GENERAL
5.3.2 CONDITION INSPECTION
TASKS
5.3.3 PERIODIC INSPECTION
TASKS
5.4 MAINTENANCE, REPAIR &
ALTERATIONS of PRIMARY
STRUCTURES
5.4.1 GENERALGENERAL
5.4.2 FUSELAGE
5.4.3 WINGS
5.4.4 EMPENNAGE
5.4.5 FLIGHT CONTROLS
5.4.6 LANDING GEAR
5.4.7 WHEEL & BRAKE
ASSEMBLIES
5.4.8 ENGINE MOUNT
5.4.9 ENGINE
5.4.10 FUEL SYSTEM
5.4.11 PROPELLER
Manual number SC10000AMM
Date: 04/18/2013
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
TABLE OF CONTENTS
5.4.12 UTILITY SYSTEMS
5.4.13 AVIONICS AND
INSTRUMENT SYSTEMS
5.4.14 ELECTRICAL SYSTEMS
5.4.15 SEATS
5.5 STRUCTURAL REPAIRS
5.5.1 GENERAL
5.6 PAINTING & COATINGS
5.6.1 GENERAL
5.6.2 PAINTING
6 LINE MAINTENANCE, REPAIRS &
ALTERATIONS
6.1 AUTHORIZATION TO PERFORM
LINE MAINTENANCE, REPAIR,
ALTERATIONS, AND INSPECTIONS
6.1.1 AUTHORIZATION TO
PERFORM LINE
MAINTENANCE, REPAIR,
ALTERATIONS, AND
INSPECTIONS
6.1.2 FAA AUTHORIZATION FOR
PILOT/OWNER TO
PERFORM LINE
MAINTENANCE TASKS
6.2 LINE MAINTENANCE TASKS
6.2.1 100-HOUR INSPECTION
6.2.2 ANNUAL INSPECTION
6.2.3 SERVICING OF FLUIDS
6.3 REMOVAL & REPLACEMENT OF
COMPONENTS
6.3.1 GENERAL
6.3.2 JACKING AND LIFTING
6.3.3 FUSELAGE
6.3.4 WINGS
6.3.5 EMPENNAGE
6.3.6 FLIGHT CONTROLS
6.3.7 LANDING GEAR
6.3.8 WHEEL & BRAKE
ASSEMBLIES
6.3.9 ENGINE MOUNT
6.3.10 ENGINE
6.3.11 ENGINE CONTROLS
6.3.12 AIR INDUCTION SYSTEMS
6.3.13 EXHAUST SYSTEM
6.3.14 ENGINE COWL
6.3.15 FUEL SYSTEM
6.3.16 PROPELLER
6.3.17 ELECTRICAL POWER
SYSTEMS
POWERPLANT – IGNITION
6.3.18
6.3.19 ELECTRICAL
6.3.20 STALL WARNING SYSTEM
6.3.21 HOSES AND LINES
6.3.22 LEVELING
0
Page: v