Cub Crafters CC11-100 Maintenance Manual page 66

1 GENERAL
The main wheels are of aluminum construction and are designed to be used with tires and
tubes. The approved tire sizes are 6.00 x 6, 8.00 x 6, 8.50 x 6, 26" LSA Tundra, and 29" LSA
Tundra.
Each main wheel is provided with a set of single disc brakes. The left and right systems are
independent of each other. There is a valve at the front of each rudder pedal that operates the
parking brake. The units form an integral part with the copilot's rudder brakes. To operate the
parking brake, press the upper section of both rudder pedals and toggle the valve (vertical is
open, horizontal is locked). The master cylinders push hydraulic fluid to the calipers where two
pistons are displaced and force the brake linings against a disc. Each main wheel utilizes a
Grove 6.00x6 caliper, secured by a four-hole backing plate.
The tail wheel swivels through 360 degrees and is steerable via the rudder pedals. It is mounted
to the fuselage with steel spring leafs.
2 MAINTENANCE
Refer to Section 6.3.8 for maintenance and servicing of the wheel and brake assemblies. No
major repair or alterations, as outlined in ASTM F2483, FAR 43, or in this manual are authorized
at this time.
To obtain engineering approvals for any major repairs or alterations, please contact Cub
Crafters at:
Cub Crafters, Inc.
th
1918 South 16 Avenue
Yakima, WA. 98903
Tel: 509-248-9491
support@cubcrafters.com
5.4.7
Page: 2
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Manual number SC10000AMM
Date: 10/01/2010