Cub Crafters CC11-100 Maintenance Manual page 58

1. GENERAL
The wing is covered with fabric, has two extruded aluminum spars, pressed aluminum ribs, and
aluminum leading and trailing edge skins. Rigidity is provided by drag wires and drag braces.
The left wing panel houses an optional landing light. A stall warning vane is installed on the
leading edge of the left wing. The wing incorporates slotted wing flaps inboard of the ailerons.
2. MAINTENANCE
Refer to Section 6.3.4 for maintenance and servicing of the wings. No major repair or
alterations, as outlined in ASTM F2483, FAR 43, or in this manual are authorized at this time.
To obtain engineering approvals for any major repairs or alterations, please contact Cub
Crafters at:
Cub Crafters, Inc.
th
1918 South 16 Avenue
Yakima, WA. 98903
Tel: 509-248-9491
support@cubcrafters.com
5.4.3
Page: 2
CUB CRAFTERS, INC.
CC11-100 MAINTENANCE MANUAL
Manual number SC10000AMM
Date: 04/27/2009